Gloves Finntrail FREERIDE Graphite 2700
Code: 2700Graphite-XLPrice 79 €In stock.
10 pcs - On order (2–4 working days)
0 pcs - In stock in VilniusIn stock: 10 pcs-
Finntrail · Winter gloves
Finntrail FREERIDE Graphite 2700 Winter Gloves
Warm winter gloves down to −25 °C with a long cinch cuff, built for winter fishing and long hours outdoors in hard cold. A HIPORA® membrane and water-repellent upper guard against damp and wind, the reinforced genuine leather palm is durable, and reflective elements add visibility in the dark.
Who it is for
Made for long spells in hard cold, when warmth and a dry hand matter most.
- •For winter fishing and long hours outdoors.
- •For active time in the open air.
- •For snowmobiling in extreme cold.
When it shines
Best in deep winter cold down to −25 °C: the long cinch cuff keeps snow out, and the reflective elements help you stay visible in the dark.
Technical specs
Materials & technology
HIPORA® membrane
The breathable HIPORA® membrane and water-repellent upper keep out damp and wind and vent sweat from inside, so your hand stays dry and warm.
Long cinch cuff
The long cuff with adjustable width and an extra wrist cinch with an elastic loop seals the hand firmly and keeps out snow.
Reinforced leather palm
The reinforced genuine leather palm is durable and grips a handlebar or rod well even in the wet.
Warmth and visibility
Advanced thermal insulation holds the heat down to −25 °C, and reflective elements help you stay visible in the dark.
How it differs from ordinary winter gloves
Care
Hand wash in cool water without softener; do not machine wash. Care for the leather palm with a leather-specific product, and refresh the water-repellent (DWR) finish with an impregnation spray once drops stop beading. Dry at room temperature, not on a radiator or by a fire. Store in a dry, ventilated place.
Frequently asked questions
What cold are these gloves made for?
The maker states they are made for hard winter cold down to −25 °C. In real use, a lot depends on movement, wind and whether your hand stays active.
Are the gloves waterproof?
Yes. The HIPORA® membrane and water-repellent upper keep out water and wind, and your hand stays dry in snow and slush. The membrane breathes, so sweat from inside is vented out.
What is the palm made of?
The palm is reinforced genuine leather, so it grips a handlebar or rod well and stays durable even in the wet. Sizes S–XL are available.
What is the long cuff for?
The long cuff with adjustable width and an extra wrist cinch with an elastic loop seals the hand firmly and keeps out snow and wind, so your hand stays warm and dry.
How do I care for the gloves?
Hand wash in cool water without softener, treat the leather palm with a leather-specific product, and when the water-repellent finish wears down, refresh it with an impregnation spray. Dry at room temperature, not on a radiator.
What about warranty and returns?
We offer a 2-year warranty, you can return within 30 days, and delivery from our Vilnius warehouse is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We’ll help you pick another size.
Delivery
Free delivery from our Vilnius warehouse with a tracking number.
Not sure about the size or whether it suits your activity? Message us, we’ll reply quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.
How to Choose the Correct FINNTRAIL Men’s Glove Size
Choosing the correct glove size is important for comfort, grip, and precise hand movement. Gloves that are too small may compress the palm, restrict finger movement, and wear out faster, while gloves that are too large may reduce control, slip on the hand, and interfere with active use.
FINNTRAIL glove size is selected according to palm circumference in centimeters. Measure around the palm, just below the knuckles, without including the thumb.
Measure Your Palm Circumference
Wrap the measuring tape around the widest part of your palm, just below the knuckles. Do not include the thumb in the measurement.
How to measure: keep your hand relaxed, with the measuring tape close to the palm, but not tight enough to press into the skin.If you measure both hands and the circumference differs, choose the size according to the larger hand.
Select Your Size Using the Chart
Compare your palm circumference with the FINNTRAIL glove size chart. If your measurement falls between two sizes, choosing the larger size is usually more practical.
Size Palm Circumference, cm S 19–20 M 21–22 L 23–24 XL 25–26 Why Is the Correct Glove Size Important?
Gloves should fit securely around the hand without restricting movement. The correct size allows you to comfortably hold a fishing rod, handlebar, tools, or other equipment.
Important: gloves that are too tight may restrict circulation and reduce warmth, while gloves that are too loose may reduce grip and control accuracy.When Should You Choose a Larger Size?
- If your palm circumference falls between two sizes.
- If you prefer a slightly looser fit.
- If you will wear the gloves for long periods and maximum comfort is important.
- If you plan to wear a thin liner glove underneath.
Recommendation: for active use, choose a size that fits securely on the hand without restricting finger movement.Recommendation Before Ordering
Before ordering FINNTRAIL gloves, measure your palm circumference in centimeters and compare it with the size chart. Measure accurately around the palm, below the knuckles, without including the thumb.
Best result: provide your palm circumference in centimeters. This measurement allows the most accurate FINNTRAIL glove size recommendation.Summary
To choose the correct FINNTRAIL men’s glove size, the key measurement is palm circumference in centimeters. Wrap the measuring tape around the palm below the knuckles, without including the thumb. Correctly sized gloves provide comfort, reliable grip, and unrestricted movement.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to all parcel lockers in Lithuania or by courier to your home.
- Delivery is free of charge.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are completely free.
- Together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
