Finntrail POWERMAN Graphite 4625 semi-overall
Code: 4625Graphite-XS-
Finntrail · Premium outdoor gear
Finntrail POWERMAN Graphite 4625 Insulated Bib
A warm winter bib with suspenders, built for snowmobiles, ATVs and long winter outings down to −30 °C. A 4-layer HARD-TEX® membrane with Thermalrate insulation, a reinforced seat and lower legs, and 3M™ reflectives: it keeps out water, snow and wind, holds warmth and lets you move.
Who they are for
Made for the snowmobile and ATV rider and the ice angler who needs a warm, tough, waterproof base layer for long hours out in the cold.
- •Snowmobiling and ATVs in winter, when you need protection from wind, snow and cold.
- •Ice fishing and the outdoors, when you sit on snow or ice and a reinforced seat matters.
- •Long winter outings down to −30 °C, when your gear has to keep you warm all day.
When they shine
They perform best in deep winter and hard frost, in active outdoor use where uninsulated pants get cold and wet, and a bibless model slides down and lets snow in at the waist.
Technical specs
Materials & technology
HARD-TEX® 4-layer membrane
A microporous membrane with billions of pores smaller than a water drop and larger than a vapour molecule: it stops water and snow from outside yet lets sweat vapour escape, so you don’t overheat even when active.
Thermalrate insulation
A synthetic insulation with high thermal efficiency: it holds warmth against the body down to −30 °C, recovers loft quickly after compression and adds little weight.
Reinforced zones
A reinforced seat and lower legs withstand sitting on snow and ice and heavy wear, so the fabric doesn’t abrade where the load is highest.
Adjustable suspenders and waist
The suspenders and waist adjust to your body: the bib sits securely, doesn’t slide down as you move and keeps snow out at the waist.
3M™ reflective elements
Reflect light back toward its source for better visibility at dusk and in the dark.
How they differ from a cheaper option
Care
Wash up to 30 °C with a dedicated membrane wash (e.g. Mountval Wash & Care), without softener or bleach. Restore the water repellency (DWR) with Mountval Waterproofing Refresher. Dry naturally, not on a radiator, to protect the insulation. Repair minor membrane damage with a dedicated adhesive (Aquaseal / Aquasure) on a clean, dry surface.
Frequently asked questions
How cold can I wear them in?
The Thermalrate insulation gives comfort down to −30 °C in active winter use. The membrane blocks wind and snow so warmth stays in and you don’t get cold even after long spells outside.
Are they good for snowmobiles and ATVs?
Yes. This is a winter bib built for snowmobiles, ATVs and ice fishing: the reinforced seat and lower legs handle intensive wear and sitting on snow.
Will snow soak through?
No. The 4-layer HARD-TEX® membrane is water resistant to 17,000 mm, so snow and melt stay out, while the fabric still breathes (8,000 g/m²/24h) and doesn’t trap sweat.
Are the suspenders and waist adjustable?
Yes. The suspenders and waist adjust to your body, so the bib sits securely, doesn’t slide down as you move and keeps snow out at the waist.
How do I care for a warm membrane bib?
Wash up to 30 °C with Mountval Wash & Care, then restore water repellency with Mountval Waterproofing Refresher and dry naturally. Proper care keeps the waterproofness, breathability and warmth.
What about warranty and returns?
We offer a 2-year warranty, you can return within 30 days, and delivery from our Vilnius warehouse is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We’ll help you pick another size.
Delivery
Free delivery from our Vilnius warehouse with a tracking number.
Not sure about the size or whether they suit your activity? Message us, we’ll reply quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.
How to Choose the Correct FINNTRAIL Men's Pants Size
Choosing the correct pants size ensures comfort, freedom of movement and optimal performance during outdoor activities. Pants that are too small may feel tight around the waist or hips and restrict movement, while pants that are too large may slide down, interfere with walking and reduce overall comfort.
The FINNTRAIL size chart shows body measurements, not garment measurements. FINNTRAIL pants are designed with additional room for mobility, comfort and layering when needed.
Measure Your Height
Height is one of the key measurements when choosing men's pants, as it helps determine overall fit and leg length. Measure your height while standing upright without shoes.
How to measure: stand straight with your feet together and measure from the floor to the top of your head.Measure Your Waist
Measure your waist at its narrowest point or where you normally wear your pants. The measuring tape should fit comfortably around your body without being too tight.
Important: do not suck in your stomach or tighten the tape excessively. Pants should allow comfortable movement, sitting and layering.Measure Your Hips
Measure around the fullest part of your hips. This measurement is particularly important because pants should allow unrestricted movement while walking, climbing, sitting or engaging in outdoor activities.
Recommendation: if your hip measurement falls into a larger size than your waist measurement, choose the size according to your hips.Measure Your Inseam
Inseam is measured from the crotch down to the inside of the ankle. This measurement helps determine whether the pants will provide the proper leg length for your height.
If you plan to wear taller boots or use the pants for active outdoor activities, ensuring the correct inseam length is especially important.
How to Use the Size Chart
Measurement Description Height Body height in centimeters. Waist Waist circumference. Hips Hip circumference measured around the fullest part of the hips. Inseam Inside leg length from crotch to ankle. Start by checking your waist and hip measurements. Then confirm that the selected size matches your height and inseam. If one measurement falls into a larger size category, it is generally recommended to choose the larger size.
Reference Size Chart
Size Height Waist Hips Inseam XXS 155–165 70–76 82–88 68–74 XS 160–170 74–80 86–92 71–77 S 165–175 78–88 90–100 74–80 SK 165–175 90–100 102–112 74–80 M 170–180 86–92 98–140 77–83 ML 180–190 86–92 98–140 83–89 MK 170–180 98–107 110–119 77–83 L 175–185 90–100 102–112 80–86 LK 175–185 106–115 118–127 80–86 XL 180–190 98–107 110–119 83–89 XLK 180–190 114–123 126–135 83–89 XXL 185–195 106–115 118–127 86–92 XXXL 190–200 114–123 126–135 89–95 What Do K and L Size Markings Mean?
S M L XLStandard sizes for men with average body proportions.
MLExtended length size for taller users whose waist and hip measurements correspond to size M.
SK MK LK XLKWider sizes designed for larger waist and hip measurements.
XXL XXXLLarger sizes for taller or broader body types.
If You Are Between Two Sizes
If your measurements fall between two sizes, choose according to how the pants will be used. For active outdoor use, the fabric should never feel tight across the waist, hips or knees.
- If your hips fall into a larger size category than your waist, choose according to your hip measurement.
- If you plan to wear thermal layers underneath, allow extra room.
- If you are taller than average, pay special attention to inseam length.
- For active use, avoid choosing pants that fit too tightly.
Important: technical pants should not be overly tight. Fabric under constant tension wears faster, restricts movement and reduces overall comfort.Recommendation Before Ordering
Before ordering FINNTRAIL men's pants, measure your height, waist, hips and inseam accurately. Take measurements while wearing a thin base layer or clothing similar to what you plan to wear underneath the pants.
Best results: provide your height, waist circumference, hip circumference and inseam measurement. These measurements allow the most accurate FINNTRAIL size recommendation.Summary
To choose the correct FINNTRAIL men's pants size, the most important measurements are height, waist circumference, hip circumference and inseam length. The correct size ensures comfort, freedom of movement, effective layering and long-lasting performance.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to all parcel lockers in Lithuania or by courier to your home.
- Delivery is free of charge.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are completely free.
- Together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
