Snow boots Finntrail BLIZZARD GraphiteYellow 5226
Code: 5226GraphiteYellow-5Price 279 €In stock.
7 pcs - On order (2–4 working days)
0 pcs - In stock in VilniusIn stock: 7 pcsShips from Vilnius in 1 business day · Free delivery · 24-month warranty · 30-day returns
This size is currently unavailable. Write to us and we will let you know when it arrives.
-
Finntrail · Snow boots
Finntrail BLIZZARD GraphiteYellow 5226 Snow Boots
Top-tier warm snowmobile boots with a removable inner boot and reinforced toe protection, built for long rides in hard cold. A HARD-TEX® membrane keeps out water and wind, Cotton Insulation (1,200 g) with an extra HighLoft insole holds the heat, and a sole of rubber and non-freezing composite keeps grip on icy ground.
Who it is for
Made for intensive winter use in hard cold, when you need more warmth, protection and stability than ordinary winter boots give.
- •For long snowmobile rides in extreme conditions.
- •For ice fishing and long hours on the ice.
- •For the active winter outdoors, where foot warmth and protection matter.
When it shines
Best on long winter trips and in the sharpest cold: when you spend a lot of time outside or on a snowmobile and your foot must stay warm, dry and protected. The extra HighLoft insole adds warmth from below.
Technical specs
Materials & technology
Two-layer warmth
Cotton Insulation (1,200 g) in the removable inner boot plus a separate HighLoft insole holds heat in sharp cold, and the inner boot is easy to take out and dry for the next time.
HARD-TEX® membrane
A breathable membrane keeps out water and wind and vents moisture from inside, so your foot stays dry and warm on snow and wet ground.
Non-freezing sole
The sole is mostly rubber with a composite polymer layer that does not freeze or harden in the cold; a special tread keeps grip on ice and snow, and an EVA layer adds cushioning and warmth.
Protection and support
Reinforced rubber toe protection guards against impacts and wear, while Achilles and ankle support with a rear pull loop gives stability and eases putting the boots on.
How it differs from ordinary snow boots
Care
After use, rinse off mud with clean water; if heavily soiled, clean with a soft brush and do not machine wash. Take out the inner boot and dry it at room temperature, not on a radiator or by a fire: high heat damages the materials and the membrane. Store in a dry, ventilated place.
Frequently asked questions
How is the Blizzard better than ordinary winter boots?
The Blizzard has two-layer warmth (Cotton Insulation 1,200 g plus a separate HighLoft insole), reinforced rubber toe protection and a sole with non-freezing composite, so it holds heat and grip better on long winter trips than ordinary boots.
How much cold do these boots handle?
The maker states they are built for hard winter cold (rated down to −75 °C with a suitable inner boot and a warm sock). In real use, a lot depends on your socks, movement and whether you stand still for a long time.
Are the boots waterproof?
Yes. The HARD-TEX® membrane keeps out water and wind, and your foot stays dry on snow, slush and wet ground. It is a breathable membrane, so moisture from inside is vented out.
Does the sole grip and stay flexible in the cold?
The sole is mostly rubber with an added composite polymer layer that does not freeze or harden in the cold, and a special tread keeps grip on ice and snow. An EVA layer adds cushioning and warmth.
What size should I choose?
Winter boots are worn with a warm sock, so choose your usual size; if you plan a thick wool sock, you can go one size up. Sizes 42–44 are available. If unsure, message us and we will help.
What about warranty and returns?
We offer a 2-year warranty, you can return within 30 days, and delivery from our Vilnius warehouse is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We’ll help you pick another size.
Delivery
Free delivery from our Vilnius warehouse with a tracking number.
Not sure about the size or whether it suits your activity? Message us, we’ll reply quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.
How to Choose the Correct FINNTRAIL Men's Footwear Size
Choosing the correct footwear size is important not only for comfort but also for safety. Boots that are too small may compress the foot, restrict circulation, and cause discomfort, while oversized footwear may reduce stability, create friction, and make walking in water or mud more difficult.
FINNTRAIL wading boots are designed to accommodate both the neoprene stockingfoot of waders and a medium-thickness sock. Therefore, sizing should be selected according to your actual foot length in centimeters, rather than your everyday shoe size.
Measure Your Foot Length
Measure the length of your foot from the heel to the tip of your longest toe. It is recommended to take measurements in the evening, when feet are naturally slightly larger after daily activity.
How to measure: stand on a sheet of paper, mark the position of your heel and longest toe, then measure the distance between these points in centimeters.If one foot is slightly longer than the other, always use the measurement of the longer foot.
Select Your Size Using the Chart
Compare your measured foot length with the FINNTRAIL size chart. For example, if your foot length is 28 cm, the recommended size is 43 (10).
EU / US Size Foot Length, cm 38 (5) 23 39 (6) 24 40 (7) 25 41 (8) 26 42 (9) 27 43 (10) 28 44 (11) 29 45 (12) 30 46 (13) 31 47 (14) 32 Why Are FINNTRAIL Wading Boots Sized Differently?
Wading boots are not ordinary everyday footwear. They are designed to be worn together with waders that feature neoprene stockingfeet. Therefore, the boot must provide sufficient space for both the neoprene stockingfoot and a medium-thickness sock.
Important: FINNTRAIL wading boots are already designed to account for the thickness of neoprene stockingfeet. There is no need to order a larger size than indicated by your actual foot length.Oversizing excessively may reduce foot support, decrease stability, and increase friction during walking.
When Should You Choose a Larger Size?
A larger size may be appropriate only in certain situations.
- If your foot length falls between two sizes.
- If you have particularly wide feet.
- If you plan to wear thicker thermal socks in cold weather.
- If the boots will be used for long-distance walking and additional room is preferred.
Recommendation: if you are between two sizes, it is generally better to choose the larger option, but avoid sizing up more than necessary.Note About Wet Wading Shoes
Wet wading shoes may fit approximately 1.5 sizes larger than standard footwear. When selecting this type of footwear, always consider the specific model and intended use.
Note: this recommendation applies specifically to wet wading shoes. Standard FINNTRAIL wading boots should be selected according to the foot length chart above.Recommendation Before Ordering
Before placing your order, measure your foot length in centimeters and compare it with the size chart. If you will be wearing the boots with waders, wet wading socks, or thermal socks, consider the complete layering system when choosing your size.
Best results: provide your foot length in centimeters and specify whether the boots will be worn with waders, wet wading socks, or thicker thermal socks.Summary
To choose the correct FINNTRAIL men's footwear size, the most important measurement is your foot length in centimeters. FINNTRAIL wading boots are already designed to accommodate neoprene stockingfeet, so there is no need to increase your size unnecessarily. If your measurement falls between two sizes or you have wider feet, choosing the larger size may provide a better fit.
Wading Boots Care
Wading boots are constantly exposed to moisture, sand, mud and abrasion from rocks. Proper care helps maintain their durability, grip and comfort.
Cleaning After Use
After every fishing trip, rinse the boots with clean water to remove mud, sand and small stones that may damage the material or seams.
If the boots were used in saltwater or extremely muddy conditions, rinse them thoroughly.
Washing the Boots
If the boots are heavily soiled, clean them by hand using water and a soft brush. Machine washing is not recommended.
If necessary, use specialized cleaning products designed for technical outdoor footwear.
Proper Drying
After washing or use, allow the boots to dry naturally at room temperature with the insoles removed.
Avoid drying them on radiators or using hot air heaters.
Regular Care
Regular cleaning and proper drying help maintain grip on slippery rocks, stability in water and comfort during long fishing trips.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to all parcel lockers in Lithuania or by courier to your home.
- Delivery is free of charge.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are completely free.
- Together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
