Waders Finntrail AIRMAN BF Grey 5260
Code: 5260Grey-8(41)SPrice 188 €In stock.
0 pcs - On order (2–4 working days)
1 pcs - In stock in VilniusIn stock: 1 pcsFree delivery in LT, LV and EE · 24-month warranty · 30-day returns · Wrong size? We will swap it
Not sure about the size? Tell us your height, waist and what you will wear underneath. We will tell you which size is yours.
This size is currently unavailable. Write to us and we will let you know when it arrives.
This size is currently unavailable. Write to us and we will let you know when it arrives.
-
Finntrail · Premium outdoor gear
Finntrail AIRMAN BF Grey 5260 Waders
Lightweight, durable boot-foot waders that keep you dry in water and mud alike. A four-layer HARD-TEX® membrane (20,000 mm), a Teflon® finish, fully taped seams and integrated rubber boots with neoprene lining: protection from water and dirt that still breathes and lets you move.
Who they are for
Made for the angler, wader and off-road enthusiast who wants reliable, light protection from water and mud with the boots already built in.
- •Fishing while wading a river or lake, when you need dry feet and free movement.
- •Off-road and active outdoors in muddy, wet conditions.
- •Long days outside, where low weight and breathability matter.
When they shine
They perform best in a cold, wet season, wading in water and on muddy trails, where cheap waders leave you sweaty inside or eventually leak through the seams.
Technical specs
Materials & technology
HARD-TEX® 4-layer membrane
A microporous membrane with billions of pores smaller than a water drop and larger than a vapour molecule: it stops water from outside yet lets sweat vapour escape. Four layers withstand prolonged water contact and abrasion.
Teflon® finish
A water- and dirt-repellent finish on the outer fabric: it wets out less, resists marks and streaks, and dries faster.
Integrated boots with neoprene lining
Rubber boots attached straight to the waders, with a soft neoprene lining: warmth, comfort and a firm footing in the water, no separate boots to choose.
Fully taped seams and YKK zippers
Taped strips seal the needle holes, and Japanese YKK waterproof zippers keep moisture out, so water cannot get inside.
How they differ from a cheaper option
Care
Hand wash up to 30 °C with a dedicated membrane wash (Mountval Wash & Care), without softener or bleach: ordinary detergent clogs the membrane. When water stops beading, restore the water repellency (DWR) with an impregnator (Mountval Textile Shield). Dry naturally, not on a radiator or in the sun. Rinse the neoprene socks with fresh water after fishing and dry them well.
Frequently asked questions
Do I have to choose the boots separately?
No. The boots are already built in (boot foot): rubber, neoprene-lined and attached to the waders. You only pick a size, which covers both the garment and the boot size, nothing to buy separately.
Will I really stay dry in the water?
Yes. A four-layer HARD-TEX® membrane, 20,000 mm water resistance, fully taped seams and integrated boots. Made for wading and working in wet, demanding conditions.
Do the waders breathe, or will I sweat?
They breathe: breathability is 7,000 g/m²/24h. The HARD-TEX® membrane lets sweat vapour out while keeping water off from outside, so you stay dry inside even when active.
What are they good for?
Fishing while wading, off-road and active outdoors in demanding, wet conditions. These are among the lightest boot-foot waders in their class.
How do I care for membrane waders?
Hand wash up to 30 °C with a dedicated membrane wash (Mountval Wash & Care), without softener, and restore the water repellency with an impregnator (Mountval Textile Shield). Rinse the neoprene socks with fresh water and dry naturally, away from radiators: proper care keeps both the waterproofing and the breathability.
What about warranty and returns?
We offer a 2-year warranty, you can return within 30 days, and delivery to Lithuania, Latvia and Estonia is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We’ll help you pick another size.
Delivery
Free delivery to Lithuania, Latvia and Estonia with a tracking number.
Not sure about the size or whether they suit your activity? Message us, we’ll reply quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.
Register this item in the Finntrail Club
Free annual membrane service, priority repairs, early access to new collections and a care coupon worth 3 % of every purchase at finntrail.lt. Registration is free, no matter where you bought the item.
Intended forMenWater resistance20 000 mmThis chart covers the whole product line. The sizes made for this particular model are shown in the size selector above.
How to Choose the Correct FINNTRAIL Wader Size?
Choosing the correct wader size is one of the most important factors for comfort, freedom of movement and long-term durability. Waders that are too small may restrict movement and place excessive stress on seams, while oversized waders may reduce comfort and make active movement less efficient.
FINNTRAIL waders are designed to provide enough room for thermal and insulating layers while maintaining complete freedom of movement. Therefore, the size chart is based on body measurements, not the actual dimensions of the waders.
Measure Your Largest Girth
The first and most important measurement is your largest body girth. In most cases, this is either your hips or waist/stomach circumference, depending on which area is larger.
Measure: around the widest part of your body while keeping the measuring tape comfortably snug without tightening it.This measurement usually determines whether your waders will remain comfortable while walking, sitting, climbing or taking large steps.
Measure Your Inseam Length
The second important measurement is the inseam length.
Measure from the crotch down to the ankle along the inside of the leg. This measurement helps determine whether the wader length will be suitable for your height.
Important: If you are taller or shorter than average for your body circumference, consider choosing extended sizes (ML, LL, XLL) or wider sizes (SK, MK, LK, XLK, XXLK).FINNTRAIL Wader Size Chart
The chart below shows recommended body measurements for selecting the correct FINNTRAIL wader size.Size Height (cm) Largest Girth (cm) Inseam (cm) Sock Length (cm) XXS 158-162 84-88 70-72 27 XS 163-167 89-93 73-75 27 S 168-172 94-100 76-78 27 SK 168-172 106-111 76-78 27 M 173-177 101-105 79-81 28 ML 180-190 101-105 85-87 28 MK 173-177 112-120 79-81 29 L 172-182 106-111 82-84 29 LL 188-192 106-111 88-90 30 LK 178-182 121-127 82-84 29 XL 183-187 112-120 85-87 30 XLL 198-202 112-120 93-95 31 XLK 183-187 128-136 85-87 30 XXL 188-192 121-127 88-90 31 XXLK 188-192 135-143 88-90 31 XXXL 193-200 128-136 91-93 31 What Do the Size Codes Mean?
S M L XLStandard sizes for average body proportions.
ML LL XLLExtended-length sizes for taller users.
SK MK LK XLKWider sizes for larger body circumferences.
XXLK XXXLSizes designed for larger body dimensions and taller users.
If You Are Between Two Sizes
If your measurements fall between two sizes, it is generally recommended to choose the larger size.
- Provides additional room for thermal clothing and extra layers.
- Allows greater freedom of movement while fishing or riding off-road.
- Reduces stress on seams and membrane materials during active use.
Recommendation Before Ordering
Best results: Provide your height, largest body girth and inseam measurement. Based on these measurements, the most suitable FINNTRAIL wader size can be selected accurately.If you are unsure between several sizes, we recommend contacting us before placing your order. This helps avoid exchanges and ensures maximum comfort from the very first day of use.
Summary
To accurately choose your FINNTRAIL wader size, you need three key measurements: height, largest body girth and inseam length. Selecting the correct size ensures comfort, unrestricted movement, efficient layering and a longer product lifespan.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to parcel lockers in Lithuania, Latvia and Estonia or by courier to your door.
- Delivery to Lithuania, Latvia and Estonia is free of charge. Courier delivery to other EU countries: Poland €4.99, Germany €9.99, other EU countries €12.99. The final cost is shown at checkout before payment.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are free within Lithuania, Latvia and Estonia. From other countries the return shipment is paid by the buyer.
- In Lithuania, Latvia and Estonia, together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
