Finntrail MIST Graphite 4033 Raincoat
Code: 4033Graphite-MPrice 119 €In stock: 0 pcsFree delivery in LT, LV and EE · 24-month warranty · 30-day returns · Wrong size? We will swap it
Not sure about the size? Tell us your height, waist and what you will wear underneath. We will tell you which size is yours.
This size is currently unavailable. Write to us and we will let you know when it arrives.
This size is currently unavailable. Write to us and we will let you know when it arrives.
-
Finntrail · Rainwear
Finntrail MIST Graphite 4033 Raincoat
A lightweight membrane raincoat for fishing, ATV riding and other outdoor activities when the weather turns every hour. Wear it on its own or over clothing and gear, and pack it into its own hood when you do not need it. The Finntrail MIST 4033 raincoat is made from a 2.5-layer fabric with a HARD-TEX membrane and a durable water-repellent (DWR) finish. All seams are taped and the zippers are water-resistant, so rain and wind stay outside. A straight fit with an extended back, a high collar and a hood with a laminated visor cover the gaps a short jacket leaves open. The coat is not insulated: you choose the warmth yourself by what you wear underneath.
Who it is for
Made for people who spend hours outdoors and do not want the rain to cut them short: anglers by the water, ATV riders on a trip and travellers who need protection that fits in a backpack.
- •For fishing from the bank or a boat, when rain comes unannounced.
- •For ATV trips at a steadier pace, pulled on over your riding gear.
- •For everyday wear in town and on the road, waiting in a backpack or car.
When it works best and who it is not for
Best in changeable spring, summer and autumn weather, when showers come and go and the coat has to go on quickly over what you already wear. Not for: the coat has no insulation, so on a cold day wear a warm layer under it. The light 2.5-layer fabric is less abrasion-resistant than a 3-layer one, so for heavy daily work in thick brush pick a tougher jacket. The long cut is not meant for hours of aggressive ATV riding: rain suits work better for that.
Technical data
Materials and technology
2.5-layer fabric with a HARD-TEX membrane
The membrane blocks rain and wind and lets moisture out from the inside, so the coat does not turn into a sauna. The half layer on the inside is a protective print instead of a separate lining: the fabric stays light and fits in the hood, but it is less abrasion-resistant than a 3-layer fabric.
DWR finish
A water-repellent finish on the outer fabric: rain beads and rolls off, the surface soaks up less and dries faster. It is not a membrane but its helper, so over time the finish needs renewing with an impregnator.
Taped seams and water-resistant zippers
Tape covers every needle hole, and the zippers hold water back where an ordinary garment leaks first.
Hood, collar and raglan sleeves
The hood adjusts in two directions to sit close to your head, while the laminated visor keeps its shape and keeps rain off your face. The high collar closes the neck against wind, and the raglan sleeves with hook-and-loop cuffs let you raise your arms freely when casting or steering.
How to choose between Finntrail rainwear
Care
Wash up to 30 °C with a dedicated membrane wash (Mountval Wash & Care), without softener or bleach: ordinary detergent clogs the membrane. When water stops beading, restore the water repellency (DWR) with an impregnator (Mountval Textile Shield). Dry naturally, not on a radiator or in the sun. Pack the coat into its hood only when dry, and out of season store it hanging, not compressed.
Frequently asked questions
Is the Finntrail MIST 4033 raincoat waterproof?
Rain is kept out by the HARD-TEX membrane in the 2.5-layer fabric: it blocks water and wind and lets moisture out from the inside. All seams are taped and the zippers are water-resistant. We have no confirmed hydrostatic head figure for this model, so we do not quote one.
What is the difference between the DWR finish and the membrane?
DWR is a thin water-repellent finish on the outer fabric: drops roll off and the surface soaks up less water. The membrane is a layer inside the fabric that actually stops the water. The finish wears off over time, so you renew it with an impregnator, while the membrane stays.
Is MIST warm?
No, the coat is not insulated. It protects from rain and wind, and the warmth comes from what you wear underneath. On a cool day a fleece is enough, on a cold day wear a warm jacket under it: the straight fit leaves room for layers.
Is the coat suitable for ATV riding?
It works for ATV trips when you need to cover your riding gear quickly against rain. As it is a long coat, for hours of aggressive riding in mud a rain suit with separate trousers is more comfortable.
How do I pack and carry the coat?
The Finntrail MIST 4033 raincoat packs into its own hood and fastens with a hook. The small bundle is easy to keep in a backpack, boat or car, so it is at hand when the rain starts.
Which size should I take?
You will often wear the coat over other clothing, so think of the thickest layer you plan to wear under it. Available sizes are M, L, XL and XXL. Not sure, send us your height and what you will wear underneath, and we will help you choose.
What about warranty and returns?
We give a 24-month warranty, you can return within 30 days, and delivery to Lithuania, Latvia and Estonia is free with a tracking number. In Lithuania Finntrail products are supplied by the official representative Kamane MB.
Peace of mind
Warranty
24-month warranty. We settle manufacturing defects fast, without bureaucracy.
Returns
Not right? Return within 30 days. We will help you pick another size.
Delivery
Free delivery to Lithuania, Latvia and Estonia with a tracking number.
Not sure about the size or whether it suits your activity? Write to us, we will answer quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), usually you get the answer right away.
Register this item in the Finntrail Club
Free annual membrane service, priority repairs, early access to new collections and a care coupon worth 3 % of every purchase at finntrail.lt. Registration is free, no matter where you bought the item.
This chart covers the whole product line. The sizes made for this particular model are shown in the size selector above.
How to Choose the Correct FINNTRAIL Men’s Jackets Size
Choosing the correct FINNTRAIL jacket size ensures comfort, freedom of movement, effective layering and proper protection from weather conditions. A size that is too small may restrict movement and feel tight around the chest or shoulders, while a size that is too large may reduce heat retention and overall fit.
The size chart shows body measurements, not garment measurements. FINNTRAIL gear is designed with extra room for comfort and movement, so sizing should be selected according to your body measurements.
Measure Your Chest Girth
Measure around the fullest part of your chest, keeping the measuring tape horizontal. Stand straight and keep the tape close to the body, but not tight.
How to measure: measure around the widest part of your chest while breathing naturally and keeping your body relaxed.This measurement is especially important when choosing jackets and the upper part of a suit.
Measure Your Waist and Hips
Measure your waist at the narrowest part or where you usually wear your pants. Measure your hips around the widest part.
Important: do not pull in your stomach and do not tighten the measuring tape too much. The gear should leave enough room for movement, base layers and comfortable sitting.If you are choosing a suit or pants, hip and waist measurements are just as important as height.
Measure Inseam and Sleeve Length
Inseam is measured from the crotch to the inside of the ankle. Sleeve length helps determine whether the jacket sleeves will properly cover your arms during active movement.
Recommendation: check these measurements if you are taller, have longer arms or legs, or are choosing between a standard and a longer size.How to Use the Size Chart
Measurement Description Height Body height in centimeters. Chest girth Chest circumference measured around the fullest part of the chest. Waist girth Waist circumference. Hips Hip circumference measured around the widest part of the hips. Inseam Inside leg length from crotch to ankle. Sleeve Sleeve length. First, choose the size according to the main girth measurements — chest, waist and hips. Then check whether the selected size matches your height, inseam and sleeve length.
Reference Size Chart
Size Height Chest Waist Hips Inseam Sleeve XXS 158–162 80–86 70–76 82–88 53–57 53–57 XS 163–167 84–90 74–80 86–92 53–57 55–59 S 168–172 88–98 78–88 90–100 57–61 57–61 SK 168–172 100–110 90–100 102–112 57–61 57–61 M 173–177 96–102 86–92 98–104 57–61 59–63 MK 173–177 108–117 98–106 110–118 59–63 59–63 ML 180–190 96–102 86–92 98–104 63–65 63–65 L 178–182 100–110 90–100 102–112 61–64 61–64 LK 178–182 119–125 106–114 118–128 61–64 61–64 XL 183–187 108–117 98–106 110–118 61–64 63–65 XLK 185–190 124–133 114–122 126–134 63–65 63–65 XXL 185–195 116–125 106–114 118–127 63–65 64–67 XXXL 190–200 124–133 114–122 126–134 65–69 65–69 What Do K and L Size Markings Mean?
S M L XLStandard sizes for men with average body proportions.
MLLonger size for taller users whose girths match size M but who need extra length.
SK MK LK XLKWider sizes for larger chest, waist or hip measurements.
XXL XXXLLarger sizes for taller users or broader body types.
If You Are Between Two Sizes
If your measurements fall between two sizes, choose according to how the gear will be used. Jackets and suits should leave enough room for base layers, while thermals should fit closer to the body without restricting movement.
- If you are choosing a jacket or suit, the larger size is usually the safer choice.
- If you are choosing thermal clothing, the fit should be close but not tight.
- If height matches one size but girths match another, prioritize girth measurements.
- If you will wear additional layers, leave more room.
Important: technical gear should not be too tight. Fabric under tension wears faster and may restrict membrane performance and freedom of movement.Recommendation Before Ordering
Before ordering a FINNTRAIL jacket, suit or thermal clothing, accurately measure your main body parameters. Take measurements while wearing a thin base layer or clothing similar to what you plan to wear under the gear.
Best result: provide your height, chest, waist and hip measurements. If possible, also include inseam and sleeve length.Summary
To choose the correct FINNTRAIL men’s jackets, suits or thermals size, the most important measurements are height, chest girth, waist girth, hips, inseam and sleeve length. A correctly selected size ensures comfort, layering ability, freedom of movement and effective protection for active use.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to parcel lockers in Lithuania, Latvia and Estonia or by courier to your door.
- Delivery to Lithuania, Latvia and Estonia is free of charge. Courier delivery to other EU countries: Poland €4.99, Germany €9.99, other EU countries €12.99. The final cost is shown at checkout before payment.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are free within Lithuania, Latvia and Estonia. From other countries the return shipment is paid by the buyer.
- In Lithuania, Latvia and Estonia, together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
