Gloves Finntrail LOBSTER GraphiteRed 2800
Code: 2800GraphiteRed-MPrice 79 €In stock: 0 pcsFree delivery in LT, LV and EE · 24-month warranty · 30-day returns · Wrong size? We will swap it
Not sure about the size? Tell us your height, waist and what you will wear underneath. We will tell you which size is yours.
This size is currently unavailable. Write to us and we will let you know when it arrives.
This size is currently unavailable. Write to us and we will let you know when it arrives.
-
Finntrail · Winter gloves
Finntrail LOBSTER GraphiteRed 2800 Winter Gloves
Winter gloves rated to –30 °C with a lobster cut: two fingers together give you mitten warmth, while the thumb and index finger keep you in control. Three layers work in the Finntrail LOBSTER GraphiteRed 2800 gloves: a HIPORA® membrane keeps moisture and snow out, THERMALRATE® insulation holds the heat, and inner microfleece gloves sit right against the skin. The palm is reinforced with leather pads, so handlebars or a rod do not wear the material through, and the extended cuffs cover the edge of your sleeve so wind and snow cannot get inside.
Who they are for
Made for hard frost, when ordinary gloves stop warming and mittens take away your ability to do anything.
- •Ice fishing and standing still in the cold.
- •Snowmobiling and riding into the wind.
- •Any outdoor activity down to –30 °C.
When they shine
Best in deep cold with wind: two fingers in one pocket warm each other, so the hand stays warm where a five finger glove already gives up.
Technical specs
Materials & technology
Lobster cut
Two fingers share one pocket and warm each other, while the thumb and index finger stay separate. That gives mitten level warmth without losing your grip.
HIPORA® membrane
The membrane keeps snow and moisture out but lets vapour through, so the hand does not end up wet from sweat. Water resistance 10 000 mm, breathability 8 000 g/m²/24h.
THERMALRATE® insulation
The insulation holds heat against the skin even when you stand still, so the glove works when there is little movement to warm you.
Inner microfleece gloves
A thin fleece layer sits against the skin, keeping the warmth closer to the hand, and after a day out it can be dried separately.
Leather pads and extended cuffs
Leather pads protect the palm from wearing against handlebars or a rod, while extended cuffs cover the edge of the sleeve so wind and snow stay out.
How they differ from ordinary five finger gloves
Care
Hand wash cool with a detergent made for synthetic fabrics (Mountval Polar Wash), without softener or bleach. Dry at room temperature, not near a radiator: heat damages the membrane and the taped seams. Odour inside the gloves is handled by a spray (Mountval Helmet Clean & Fresh).
Frequently asked questions
What does a lobster cut mean?
It is a glove where two fingers share one pocket while the thumb and index finger are separate. The hand warms almost like in a mitten, but you can still grip handlebars, a rod or a zipper.
How much cold do they take?
The stated limit is –30 °C. In practice a lot depends on activity: standing still in the cold gets you colder faster than moving, and wet gloves warm worse than dry ones.
Are the gloves waterproof?
They have a HIPORA® membrane, a water column of 10 000 mm and breathability of 8 000 g/m²/24h. Snow and sleet stay outside while sweat has a way out.
Can the inner gloves be taken out?
The inner microfleece gloves are a separate layer, so you can use them as a thin glove indoors or dry them separately after a long day.
How do I wash them?
Hand wash cool with a detergent for synthetic fabrics (Mountval Polar Wash) and dry at room temperature, not near a radiator. Odour inside is handled by a spray (Mountval Helmet Clean & Fresh).
What about warranty and returns?
We give a 24 month warranty, you can return within 30 days, and delivery to Lithuania, Latvia and Estonia is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We will help you pick another size.
Delivery
Free delivery to Lithuania, Latvia and Estonia with a tracking number.
Not sure about the size? Send us your palm circumference and the gloves you wear now, we will pick the right one.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you will usually get a reply right away.
Register this item in the Finntrail Club
Free annual membrane service, priority repairs, early access to new collections and a care coupon worth 3 % of every purchase at finntrail.lt. Registration is free, no matter where you bought the item.
This chart covers the whole product line. The sizes made for this particular model are shown in the size selector above.
How to Choose the Correct FINNTRAIL Men’s Glove Size
Choosing the correct glove size is important for comfort, grip, and precise hand movement. Gloves that are too small may compress the palm, restrict finger movement, and wear out faster, while gloves that are too large may reduce control, slip on the hand, and interfere with active use.
FINNTRAIL glove size is selected according to palm circumference in centimeters. Measure around the palm, just below the knuckles, without including the thumb.
Measure Your Palm Circumference
Wrap the measuring tape around the widest part of your palm, just below the knuckles. Do not include the thumb in the measurement.
How to measure: keep your hand relaxed, with the measuring tape close to the palm, but not tight enough to press into the skin.If you measure both hands and the circumference differs, choose the size according to the larger hand.
Select Your Size Using the Chart
Compare your palm circumference with the FINNTRAIL glove size chart. If your measurement falls between two sizes, choosing the larger size is usually more practical.
Size Palm Circumference, cm S 19–20 M 21–22 L 23–24 XL 25–26 Why Is the Correct Glove Size Important?
Gloves should fit securely around the hand without restricting movement. The correct size allows you to comfortably hold a fishing rod, handlebar, tools, or other equipment.
Important: gloves that are too tight may restrict circulation and reduce warmth, while gloves that are too loose may reduce grip and control accuracy.When Should You Choose a Larger Size?
- If your palm circumference falls between two sizes.
- If you prefer a slightly looser fit.
- If you will wear the gloves for long periods and maximum comfort is important.
- If you plan to wear a thin liner glove underneath.
Recommendation: for active use, choose a size that fits securely on the hand without restricting finger movement.Recommendation Before Ordering
Before ordering FINNTRAIL gloves, measure your palm circumference in centimeters and compare it with the size chart. Measure accurately around the palm, below the knuckles, without including the thumb.
Best result: provide your palm circumference in centimeters. This measurement allows the most accurate FINNTRAIL glove size recommendation.Summary
To choose the correct FINNTRAIL men’s glove size, the key measurement is palm circumference in centimeters. Wrap the measuring tape around the palm below the knuckles, without including the thumb. Correctly sized gloves provide comfort, reliable grip, and unrestricted movement.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to parcel lockers in Lithuania, Latvia and Estonia or by courier to your door.
- Delivery to Lithuania, Latvia and Estonia is free of charge. Courier delivery to other EU countries: Poland €4.99, Germany €9.99, other EU countries €12.99. The final cost is shown at checkout before payment.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are free within Lithuania, Latvia and Estonia. From other countries the return shipment is paid by the buyer.
- In Lithuania, Latvia and Estonia, together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
