Gloves Finntrail IMPACT Graphite 2712
Code: 2712Graphite-M-
Finntrail · Winter gloves
Finntrail IMPACT Graphite 2712 Winter Gloves
Insulated winter gloves with a hard carbon knuckle guard, built for off-road and snowmobiling in cold and wet conditions. A HIPORA® membrane (10,000 mm water column) keeps out water and wind, Thermalrate insulation holds the heat down to −15 °C, and a genuine leather palm with suede reinforcements delivers a firm grip.
Who it is for
Made for active winter in cold and wet, when you need a warm, waterproof glove with impact protection.
- •For off-road and enduro riding, ATV and UTV.
- •For snowmobiling and winter trips.
- •For fishing in cold and damp.
When it shines
Best where your hand needs both warmth and protection: the hard carbon knuckle guard absorbs impacts, while the membrane keeps your hands dry in slush and snow.
Technical specs
Materials & technology
HIPORA® membrane
The breathable HIPORA® membrane (10,000 mm water column, 8,000 g/m² per 24 h) keeps out water and wind, and the DWR finish beads drops off, so your hand stays dry.
Hard carbon knuckle guard
A hard carbon-fibre guard over the knuckles absorbs impacts, while sturdy inserts protect the hand in off-road, ATV/UTV and snowmobiling conditions.
Genuine leather palm
The genuine leather palm with synthetic suede reinforcements delivers a firm grip and durability, while the microfleece lining adds warmth and comfort.
Cuff and insulation
The 3 mm neoprene cuff with hook-and-loop straps sits snugly at the wrist, Thermalrate insulation holds the heat down to −15 °C, and a soft suede thumb zone is handy for wiping moisture off your face.
How it differs from ordinary winter gloves
Care
Hand wash in cool water without softener; do not machine wash. Care for the leather palm with a leather-specific product, and refresh the water-repellent (DWR) finish with an impregnation spray once drops stop beading. Dry at room temperature, not on a radiator or by a fire. Store in a dry, ventilated place.
Frequently asked questions
What cold are these gloves made for?
The maker states they are made for cold down to −15 °C. In real use, a lot depends on movement, wind and whether your hand stays active.
Are the gloves waterproof?
Yes. The HIPORA® membrane (10,000 mm water column) keeps out water and wind, and your hand stays dry in snow and slush. The membrane breathes, so sweat from inside is vented out, while the DWR finish beads drops off the surface.
What is the palm made of?
The palm is genuine leather with synthetic suede reinforcements, so it grips well and is durable, while the inside is lined with microfleece for warmth. Sizes M–XL are available.
What makes the knuckle guard special?
These are the only gloves in this range with a hard carbon (carbon-fibre) knuckle guard: it absorbs impacts and protects the hand in off-road, ATV/UTV and snowmobiling conditions. Extra sturdy inserts add protection.
How do I care for the gloves?
Hand wash in cool water without softener, treat the leather palm with a leather-specific product, and when the water-repellent finish wears down, refresh it with an impregnation spray. Dry at room temperature, not on a radiator.
What about warranty and returns?
We offer a 2-year warranty, you can return within 30 days, and delivery from our Vilnius warehouse is free with a tracking number.
Peace of mind
Warranty
2-year warranty. We resolve manufacturing defects quickly, without bureaucracy.
Returns
Not right? Return within 30 days. We’ll help you pick another size.
Delivery
Free delivery from our Vilnius warehouse with a tracking number.
Not sure about the size or whether it suits your activity? Message us, we’ll reply quickly and honestly.
And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.
How to Choose the Correct FINNTRAIL Men’s Glove Size
Choosing the correct glove size is important for comfort, grip, and precise hand movement. Gloves that are too small may compress the palm, restrict finger movement, and wear out faster, while gloves that are too large may reduce control, slip on the hand, and interfere with active use.
FINNTRAIL glove size is selected according to palm circumference in centimeters. Measure around the palm, just below the knuckles, without including the thumb.
Measure Your Palm Circumference
Wrap the measuring tape around the widest part of your palm, just below the knuckles. Do not include the thumb in the measurement.
How to measure: keep your hand relaxed, with the measuring tape close to the palm, but not tight enough to press into the skin.If you measure both hands and the circumference differs, choose the size according to the larger hand.
Select Your Size Using the Chart
Compare your palm circumference with the FINNTRAIL glove size chart. If your measurement falls between two sizes, choosing the larger size is usually more practical.
Size Palm Circumference, cm S 19–20 M 21–22 L 23–24 XL 25–26 Why Is the Correct Glove Size Important?
Gloves should fit securely around the hand without restricting movement. The correct size allows you to comfortably hold a fishing rod, handlebar, tools, or other equipment.
Important: gloves that are too tight may restrict circulation and reduce warmth, while gloves that are too loose may reduce grip and control accuracy.When Should You Choose a Larger Size?
- If your palm circumference falls between two sizes.
- If you prefer a slightly looser fit.
- If you will wear the gloves for long periods and maximum comfort is important.
- If you plan to wear a thin liner glove underneath.
Recommendation: for active use, choose a size that fits securely on the hand without restricting finger movement.Recommendation Before Ordering
Before ordering FINNTRAIL gloves, measure your palm circumference in centimeters and compare it with the size chart. Measure accurately around the palm, below the knuckles, without including the thumb.
Best result: provide your palm circumference in centimeters. This measurement allows the most accurate FINNTRAIL glove size recommendation.Summary
To choose the correct FINNTRAIL men’s glove size, the key measurement is palm circumference in centimeters. Wrap the measuring tape around the palm below the knuckles, without including the thumb. Correctly sized gloves provide comfort, reliable grip, and unrestricted movement.
Product Care Instructions
- Wash membrane clothing only with special detergents, such as Mountval Wash & Care, at a temperature no higher than 30 °C, without fabric softeners or bleach.
- After washing, restore water repellency using Mountval Waterproofing Refresher (wash-in) or a spray-on impregnation, following the product instructions.
- After impregnation, allow the product to dry naturally.
- Repair minor membrane damages with special glue, such as Aquaseal / Aquasure, only on clean and dry surfaces.
- Clean boots by hand, do not use a washing machine; if needed, use impregnation products designed for technical footwear.
Regular care helps maintain water repellency, breathability, and prolongs the product's lifespan.
For more information on how to clean Finntrail clothing and boots after use, see here.
Product delivery
We receive goods at our central warehouse twice per week: on Tuesdays and Fridays.
Depending on the order submission time, goods are included in the corresponding delivery cycle:
Order submission time Goods received Notes Until Tuesday 09:00 Friday Standard schedule. Until Friday 09:00 Next Tuesday Orders placed after 09:00 are moved to the next cycle. Important Due to holidays, inventory checks or other circumstances, delivery may be delayed by 1–3 days.
- Orders are shipped the same day they arrive at the central warehouse.
- Delivery is available to all parcel lockers in Lithuania or by courier to your home.
- Delivery is free of charge.
Returns
Please inform us about a planned return by email at pagalba@finntrail.lt or by phone +370 614 98366.
- Products can be returned within 30 days from the date of receipt.
- The returned item must be unused, with all tags attached and in the original packaging.
- Returns are completely free.
- Together with the notification about the delivered parcel you will receive a return code allowing you to return the item via any parcel locker.
Available solutions after returning the product:- We will replace it with another size.
- We will suggest the most suitable alternative.
- The refund is issued within 1–2 business days after receiving the returned item.
Membrane waterproofing and breathability
Membrane fabric is usually described using two numbers, often separated by a slash: waterproofness and breathability. The first number indicates waterproofness, the second indicates breathability.
?Waterproofing
This is a sliding scale measured in mm that shows how high a column of water you can suspend over the membrane before it starts to let moisture through.
Waterproof Rating Conditions 0–10,000 mm Light rain, dry snow, light pressure. 11,000–15,000 mm Moderate rain, average snow, light pressure. 16,000–20,000 mm Heavy rain, wet snow, some pressure. 20,000 mm+ Heavy rain, wet snow, high pressure. ?Breathability
This is the amount of moisture by weight that can pass through one square metre of fabric over a period of 24 hours. It is commonly measured in g/m²/24 hrs.
Breathability Rating Level of Breathability 0–5,000 g/m²/24 hrs Low – light exercise. 5,000–15,000 g/m²/24 hrs Medium – medium to high energy activity. 15,000 g/m²/24 hrs+ High – vigorous sustained activity.
