• Impregnation agent TX.DIRECT SPRAY-ON 300 ml

    Code: NW571P12
    Price 16 €
    In stock.
    0 pcs - On order (2–4 working days)
    6 pcs - In stock in Vilnius
    In stock: 6 pcs

    Free delivery in LT, LV and EE · 24-month warranty · 30-day returns · Wrong size? We will swap it

    Not sure about the size? Tell us your height, waist and what you will wear underneath. We will tell you which size is yours.

    This size is currently unavailable. Write to us and we will let you know when it arrives.

    This size is currently unavailable. Write to us and we will let you know when it arrives.

  •  

     

    Finntrail · Care

    Nikwax TX.DIRECT SPRAY-ON 300 ml Waterproofing

    A spray-on waterproofing treatment for breathable membrane clothing that restores water repellency on the outer fabric and keeps the garment breathing. Over time the outer fabric stops shedding water and the garment starts to soak up moisture, so it feels as though the membrane no longer breathes. This treatment restores water repellency (DWR) on the outer layer, while the membrane keeps out water and lets moisture escape. The spray-on version is made for garments with an inner moisture-absorbing lining, because you spray it on the outside only, so the lining keeps doing its job. It contains no PFAS or PFC, comes without aerosol (a pump), and the bottle is made from recycled plastic. It suits Gore-Tex, Sympatex, eVent and other membranes, on jackets, trousers and gloves.

    Who it is for

    Made for breathable membrane clothing with an inner lining, when the outer fabric has stopped shedding water and the garment starts to soak up moisture.

    • •For membrane jackets and trousers that no longer shed water.
    • •For garments with an inner moisture-absorbing lining (sprayed on the outside only).
    • •For gloves and other membrane gear you want to re-waterproof.

    When to use

    Use it when water stops beading off the fabric and soaks into the surface: the outer layer then draws in moisture, the garment feels as if it no longer breathes, and it gets cold. This spray restores water repellency, while the membrane keeps out water.

    The treatment in brief

    Type Spray-on waterproofing, DWR
    Volume 300 ml
    For Garments with an inner lining
    Suits Gore-Tex, Sympatex, eVent, membrane clothing
    Formula No PFAS or PFC, no aerosol
    Bottle Recycled plastic

    How to use

    Wash it first

    Wash the garment with Nikwax Tech Wash to remove dirt and old care residue. The treatment works best on a clean fabric, so treat the garment while still damp.

    Spray on a damp garment

    Shake the bottle and spray evenly onto the clean, damp garment from about 15 cm. Cover the most worn areas especially well, the elbows and seams.

    Wipe off excess and dry

    After a few minutes, wipe off the excess with a damp cloth. Air-dry, or, if the care label allows, tumble-dry on low heat.

    Spray-on or Wash-in

    Wash-in

    • Coats the whole garment, outside and inside
    • Best for garments without an inner lining
    • Even, full coverage
    • Applied in the washing machine

    Spray-on (this treatment)

    • Sprayed on the outside only
    • Protects the inner moisture-absorbing lining
    • Targeted coverage on worn areas
    • No tumble dryer needed, air-dries

    Good to know

    The treatment works best on a clean, damp garment, so wash it first with Nikwax Tech Wash and treat it while still damp. It contains no PFAS or PFC, comes without aerosol (a pump), and the bottle is made from recycled plastic. The garment does not have to go in a tumble dryer, it air-dries too.

    Frequently asked questions

    How does Spray-on differ from Wash-in?

    Spray-on is applied to the outer fabric only, so it is made for garments with an inner moisture-absorbing lining, keeping the lining working as it should. Wash-in treats the whole garment in the wash and suits garments without a lining better.

    Do I need to wash the garment first?

    Yes. The treatment works best on a clean, damp garment. Wash it first with Nikwax Tech Wash and treat it while still damp, do not apply it to a dirty or dry fabric.

    Will the garment still breathe?

    Yes. The treatment restores water repellency on the outer layer only, while the membrane keeps out water and lets moisture escape. That is exactly why breathability stays.

    Which membranes does it suit?

    It suits Gore-Tex, Sympatex, eVent and other membranes. You can treat jackets, trousers and gloves with a membrane.

    Do I need a tumble dryer?

    No. The garment air-dries. If the care label allows, you can also tumble-dry on low heat, but that is not required.

    What about returns?

    You can return the unopened treatment within 30 days, and delivery to Lithuania, Latvia and Estonia is free with a tracking number.

    Peace of mind

    Original product

    We supply only original manufacturer care treatments.

    Returns

    You can return unopened within 30 days.

    Delivery

    Free delivery to Lithuania, Latvia and Estonia with a tracking number.

    Not sure whether you need the Spray-on or Wash-in version? Message us, we’ll reply quickly and honestly.

    And if you want an answer even faster, ask the Finntrail AI assistant (the ASK button on the page), you’ll usually get a reply right away.

     

    Register this item in the Finntrail Club

    Free annual membrane service, priority repairs, early access to new collections and a care coupon worth 3 % of every purchase at finntrail.lt. Registration is free, no matter where you bought the item.

    Register your item